Hey! You're probably on this page because you made the great decision to purchase a DaVinci IQC!
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your DaVinci IQC Vaporizer
You will have the following pieces included in the box:
- 1x DaVinci IQC vaporizer (with replaceable battery)
- 1 x 10mm water adapter
- 1 x extra pick tool
- 1 x Charging cable (USB-A to USB-C)
- 3 x alcohol wipes
- 1 x Instructions manual
Charging your DaVinci IQC
The IQC comes with a rechargeable and replaceable flat-top 18650mAH battery. To charge the battery while it is still in your IQC, insert the provided USB-C cable into the USB-C port on the back of the IQC. Charge time is approximately 2 hours.
The 18650 battery may also be charged with the DaVinci Fast Digital Battery Charger (not included with the device). To remove the battery, open the upper lid and unlatch the battery door compartment.
Perform a quick burnoff of the oven
Once the battery is fully charged, it is worth performing a 'burn-off' of the IQC oven. This will clear the oven of any leftover residue from the manufacturing process.
To carry this out, activate the IQC by pressing the Control button for 5 times in quick succession. Switch your device into Precision temperature mode by pressing the Control button once. You can then adjust the temperature to its highest (210C) by holding the "up" navigation button.
Heating will then begin and the device will then vibrate to indicate that the set temperature has been reached.
Once the temperature has been reached, leave the device for 2 minutes and the IQC should switch off automatically. Repeat once or twice as necessary.
Now the burn off is complete, the fun can start!
Packing your DaVinci IQC
Open the IQC's bottom lid to reveal the glass lined ceramic oven.
Ensure your herbs are finely ground before placing into the oven. The Onboard Pick Tool (located under the upper lid) can be used to stir and pack the herbs into the oven.
You'll see that on the lid of the device, there is a "pearl" Zirconia adjustable spacer. Turn the pearl to increase or decrease the oven chamber volume by up to 50%. To increase vapour density, adjust the pearl to ensure a tightly packed oven.
Close the bottom lid to allow the pearl to firmly pack the herb.
Setting the temperature
Power up the device by pressing the control button 5 times in quick succession. Perform the same action to switch off the device.
There are two different temperature modes:
Smart Path mode
Smart Paths are pre-set temperature experiences that will gradually increase the temperature over an 8 minute session. Switch between Smart Paths by pressing the up or down buttons while in Smart Path Mode. By default, the device will be in Smart Path 3 when first switched on.
1. Rest: Start 210°C / End 221°C
2. Body: 199°C / End 210°C
3. Mind: 188°C / End 199°C
4. Flavour: 176°C / End 188°C
Precision Temperature Mode
If you'd like to select a temperature of choice, you can switch the device into Precision Temperature Mode. To do this, press the Control button once while the device is on, and use the up and down navigation buttons to set your temperature.
After setting the temperature, the device will vibrate once the vaping temperature has been reached.
Now the device is ready to vape!
All the extras
The IQC boasts a number of additional features to ensure a both a premium and unique vaping experience
Boost Mode - To boost your IQC quickly to 210°C, press and hold the control button until it turns red. Continue to hold the button while vaping to maintain maximum temperature. You can exit Boost Mode and return to the previous temperature at any time by pressing the up or down button.
Standby - This mode will cool down your IQC, conserving herb material and battery life. To engage standby mode, release the control button while the device is in Boost Mode. After two minutes in standby, your IQC will power down.
Stealth mode - By default, the IQC is set to be in Stealth Mode, which means that the LED display is at its lowest brightness level. To adjust to full brightness, click the control and up buttons together once. To dim the LED display, click the control and down buttons together once.
Cleaning your IQC
To keep your IQC in tip top shape and working optimally, we'd recommend regularly cleaning all parts that come into contact with vapour. Soak the mouthpiece and flavour chamber in cleaning solution as needed and rinse with water. Use a cloth dabbed in cleaning solution to wipe down the oven and other non-removable device parts.
The DaVinci App
The Bluetooth function allows you to connect the device with the DaVinci mobile app (Android only). To activate bluetooth on the device, press the up and down navigation buttons together 5 times within 4 seconds. The control button will then turn blue.
Download the DaVinci App for further personalisation features and to track and control your dosage. You can download it here.
- Tips for getting the most out of your brand new dry herb vaporizer.
- How to best clean your vaporizer.
- Choosing the right temperature for your dry herb vaporizer.
We are sure you'll enjoy your DaVinci IQC!
If you have any questions, please contact us.