Hey! You're probably on this page because you made the great decision to purchase a DaVinci IQ2!
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your DaVinci IQ2 Vaporizer
You will have the following pieces included in the box:
- DaVinci IQ2 vaporizer
- 1 x Dosage pod
- 1 x Ceramic extract disc
- Alcohol wipes and organic cotton pads
- 1 x Flat mouthpiece
- 1 x Extended mouthpiece
- 1 x Pick tool
- 1 x User manual
- 1 x Charging cable
Charging your DaVinci IQ2
The IQ2 comes with a flat top 18650 battery that is both replaceable and rechargeable.
To charge the battery while it is still in the device, insert the USB cable provided into the micro USB port on the back of the IQ2.
An initial charge will take approximately 6 hours to full charge.
Perform a quick burnoff of the oven
Once the battery is fully charged, it is worth performing a 'burn-off' of the IQ2 oven. This will clear the oven of any leftover residue from the manufacturing process.
To carry this out, activate the IQ2 by pressing the Control button for 5 times in quick succession. Switch your device into Precision temperature mode by pressing the Control button once. You can then adjust the temperature to its highest (210C) by holding the "up" navigation button.
Heating will then begin and the device will then vibrate to indicate that the set temperature has been reached.
Once the temperature has been reached, leave the device for 2 minutes and the IQ2 should switch off automatically. Repeat once or twice as necessary.
Now the burn off is complete, the fun can start!
Packing your DaVinci IQ2
Open the IQ2's bottom lid to reveal the glass lined ceramic oven.
Ensure your herbs are finely ground (using an electric herb grinder preferably) before placing into the oven. The Onboard Pick Tool (located under the upper lid) can be used to stir and pack the herbs into the oven.
You'll see that on the lid of the device, there is a "pearl" Zirconia adjustable spacer. Turn the pearl to increase or decrease the oven chamber volume by up to 50%. To increase vapour density, adjust the pearl to ensure a tightly packed oven.
Close the bottom lid to allow the pearl to firmly pack the herb.
Setting the temperature
Power up the device by pressing the control button 5 times in quick succession. Perform the same action to switch off the device.
There are two different temperature modes:
Smart Path mode
Smart Paths are preset temperature experiences that will gradually increase the temperature over an 8 minute session. Switch between Smart Paths by pressing the up or down buttons while in Smart Path Mode. By default, the device will be in Smart Path 3 when first switched on.
1. Rest: Start 210°C / End 221°C
2. Body: 199°C / End 210°C
3. Mind: 188°C / End 199°C
4. Flavour: 176°C / End 188°C
Precision Temperature Mode
If you'd like to select a temperature of choice, you can switch the device into Precision Temperature Mode. To do this, press the Control button once while the device is on, and use the up and down navigation buttons to set your temperature.
After setting the temperature, the device will vibrate once the vaping temperature has been reached.
Now the device is ready to vape!
All the extras
The IQ2 boasts a number of additional features to ensure a both a premium and unique vaping experience
Dosage Pod - Your IQ2 includes one 0.2g dosage pod which can be used for dry herbs or extracts. To use with dry herbs, simply pack the pod tightly, twist the lid onto the pod and load into the oven. To use with extracts, fill the pod with cotton, place the ceramic extract disc inside the pot and then a small amount of extract before closing the lid and loading into the oven. Use the pick tool to remove from the device after use (Warning: dosage pod will be hot after use)
Air Dial - The IQ2 is the first in its class to offer a customised airflow experience. The Air Dial on the bottom of the device can be turned to adjust the airflow and draw resistance Increasing the airflow on IQ2 will allow for a cooler, less dense vapour. Decreasing the airflow will allow for a more dense vapour.
Boost Mode - To boost your IQ2 quickly to 210°C, press and hold the control button until it turns red. Continue to hold the button while vaping to maintain maximum temperature. You can exit Boost Mode and return to the previous temperature at any time by pressing the up or down button.
Standby - This mode will cool down your IQ2, conserving herb material and battery life. To engage standby mode, release the control button while the device is in Boost Mode. After two minutes in standby, your IQ2 will power down.
Stealth mode - By default, the IQ2 is set to be in Stealth Mode, which means that the LED display is at its lowest brightness level. To adjust to full brightness, click the control and up buttons together once. To dim the LED display, click the control and down buttons together once.
Cleaning your IQ2
To keep your IQ2 in tip top shape and working optimally, we'd recommend regularly cleaning all parts that come into contact with vapour. Soak the mouthpiece and flavour chamber in isopropyl alcohol as needed and rinse with water. Use cleaning wipes to wipe down the oven and other non-removable device parts.
The DaVinci App
The Bluetooth function allows you to connect the device with the DaVinci mobile app (Android only). To activate bluetooth on the device, press the up and down navigation buttons together 5 times within 4 seconds. The control button will then turn blue.
Download the DaVinci App for further personalisation features and to track and control your dosage. You can download it here.
- Tips for getting the most out of your brand new dry herb vaporizer.
- How to best clean your vaporizer.
- Choosing the right temperature for your dry herb vaporizer.
We are sure you'll enjoy your DaVinci IQ2!
If you have any questions, please contact us.