Quick Guide to using your Crafty+ Vaporizer
Hey! You're probably on this page because you made the great decision to purchase a Crafty+; an absolute beast of a device that's small enough for even the tightest pockets!
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your Crafty+ Vaporizer,
You will have the following pieces included in the box:
- Crafty+ Vaporizer
- Power Adapter & USB Cable
- Dosing Capsule
- Spare Screens
- Base Seal Rings
- Drip Pads
Charging your Crafty Vaporizer
Storz & Bickel are thoughtful enough to pack the Crafty with the battery charged to 80% - perfect the those of us who are impatient!
However, we recommend plugging it in and charging it up to full before using - it should take less than half an hour.
From an empty battery, it takes roughly two hours to reach full charge.
Perform a quick burnoff of the Crafty's Oven
Once the battery is fully charged, it is worth performing a quick 'burn-off' of the Crafty's oven. This will clear the oven of any leftover residue from manufacturing.
To carry this out, power on the Crafty by pressing the big bright orange button on the side of the vape. The light will turn red as the oven's temperature races towards 180c. Once the light turns green double press the orange button again to put the vaporizer into 'boost' mode and the vaporizer will heat up again, this time to 200c.
Once the light has turned green again leave it for one minute and the Crafty should switch off automatically.
Now the burn off is complete, the fun can start!
Packing your Crafty Vaporizer
The Crafty performs best when your herbs are packed lightly. You'll want to ensure that the entire width of the oven is completely covered so air has to pass through the herbs.
If you're not using enough herbs to at least half-fill the oven, carefully place the concentrate pad on top of your herbs to pad your oven out.
Using your Crafty for the first time
Power your Crafty up by holding the power button for roughly 2 seconds.
For most users, the default setting is just fine. Storz & Bickel have chosen these temperatures to encourage maximum extraction of your herbs.
The vaporizer will automatically heat up to 180c. Once it has reached vaping temperature, the LED will turn from red to green.
Feel free to vape away! We find the Crafty works best when sipping firmly but gently on the mouthpiece.
Once you stop tasting anything thing it is time for boost mode!
Double press the orange button and the light should begin to flash red. When the LED turns green it means the oven is now at 200c - the perfect temperature to squeeze every last terpene out of your herbs!
Using the smartphone app to control your Crafty's advanced settings
If you're a vaping veteran it's likely you'll want to have the full control of being able to set your Crafty's temperature and fine tune your vaping experience.
The great news is that there is an app for this!
First, you'll have to download the app from either the Android or iPhone app store.
Turn on your Crafty whilst switching on your phone's Bluetooth and it should automatically connect. If not find the Crafty in your phone's Bluetooth settings.
Next, open the app and punch in your vaporizer's serial number - you'll find it on the bottom of the vape and we are ready to go!
Once inside the app, you'll have the ability to :
- Change Temperature
- Switch your Crafty on or off remotely
- Extend the auto switch off time
- Change the LED brightness
- Find your Crafty
- Set your phone to notify you when your vape has reached vaping temperature.
- Tips for getting the most out of your brand new dry herb vaporizer.
- How to best clean your vaporizer.
- Choosing the right temperature for your dry herb vaporizer.
We are sure you'll enjoy your Crafty!
If you have any questions, please contact us.