Quick Guide to using Boundless CF Vaporizer

Hey! You're probably on this page because you made the great decision to purchase a Boundless CF!

We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your Boundless CF.

 

 You will have the following pieces included in the box:

  • Boundless CF vaporizer
  • 1 x micro USB cable
  • 1 x wax/concentrate pod
  • 1 x cleaning brush
  • 1 x packing tool
  • User manual

 

Charging your Boundless CF 

To charge the battery, insert the USB cable provided into the micro USB port on the side of the device

An initial charge will take 2.5 - 3 hours. When the LED light turns green, the battery will stop charging as this indicates that the battery is at full charge.

Do not use the device while it is charging, and we'd strongly advise not to leave it on charge overnight to avoid damage to the battery.

 

Perform a quick burnoff of the oven

Once the battery is fully charged, it is worth performing a 'burn-off' of the oven. This will clear the oven of any leftover residue from manufacturing. 

To carry this out, activate the Boundless CF by rapidly pressing the power button located on the side of the device 5 times. The LED lights will flash blue to indicate that the device has now switched on.

Once the LED lights turn to a sold blue, set the device to the highest temperature (Level 5) by holding the power button until all 5 LED lights are on.

Once the temperature has been reached (LED lights turn solid blue again) leave the device for 10-15 minutes and the device should switch off automatically. Repeat once or twice as necessary.

Now the burn off is complete, the fun can start!

  

Packing your Boundless CF

Ensure the device is switched off before loading. Remove the mouthpiece from the device by rotating the entire top part anticlockwise before carefully lifting it off. This will expose the ceramic heating chamber.

Finely grind your herbs (preferably using an electric grinder) before loading into the chamber. Use the dabber tool to pack down your herbs and be careful not to over fill.

Finally, place the mouthpiece back on to the top of the device.

 

Setting the temperature

Power up the Boundless CF by pressing the power button 5 times in quick succession. The LED lights will flash blue, indicating that the device is on.

Each LED light corresponds to each of the 5 temperature settings. To switch between temperatures, hold the power button until the desired temperature setting is reached.

The LED lights will continue to flash blue until the oven has heated up to your set temperature. Once this has been reached, the LED lights will turn a solid blue 

Now the device is ready to vape! 

 

lnhaling from your Boundless CF

To draw from the device, rotate the very top part of the mouthpiece anticlockwise until it is facing the opposite direction. To get the most out of your herbs and optimal cloud production, we'd recommend taking slow, steady draws.

 

Using concentrates with your Boundless CF

The Boundless CF comes with an oil/waxy chamber so you can enjoy the device with dry herbs and concentrates.

To use with oil, fill the oil/waxy chamber with at least 5 drops and leave for a few seconds to allow the oil to settle before inserting it into the heating chamber.

To use with wax, unscrew the lid of the oil/waxy chamber and place the wax around the inside of the lid. Then replace the lid and insert into the heating chamber.

    

Further Reading

 

We are sure you'll enjoy your Boundless CF!

If you have any questions, please contact us.

Happy vaping!

elevate