Hey! You're probably on this page because you made the great decision to purchase a Herbstick - the perfect choice for a vaping virgin.

We wanted to ensure that you have the best possible experience so this page contains a brief guide on how to to get the most out of your Herbstick.



You will have the following pieces included in the box:

  • (Herbstick) Fyhit Eco Vaporizer
  • Ceramic Chamber
  • 2x Silicone Mouthpiece
  • Packing Tool
  • Brush
  • Dabber
  • USB Cable


Charging your Herbstick

Make sure your vape is fully charged before using it for the first time. You will find the micro USB port on the side of the device with an attached rubber cover. The LED button will flash white which indicates 80 - 100% charge. It takes about 3 hours for a full charge.

To prolong the long term life of your Herbstick's battery it is important to never overcharge it.


Perform an initial burn-off.

Once the battery is charged, it is worth performing a quick 'burn-off'. A burn-off will clear any residue from manufacturing out of inside the Herbstick's oven. 

To carry this out, turn on the Herbstick by holding the LED button for 3 seconds then set it to its highest temperature (red). Tap the LED button until the light is blinking red. One it has reached its full temperature the light will stay on - leave the oven on until the Herbstick automatically goes into standby mode and the burnoff should be complete.


Packing your Herbstick

Simply remove the mouthpiece and you will find the heating chamber. Ensure your herbs are ground finely. Place your ground herbs in here but remember to not overpack to allow a nice, even air flow.


Activating your Herbstick

Once packed and charged, it’s time to fire up your new vape. You will need to hold the LED button for 3 seconds to power on the Herbstick. You will notice the button flashing as soon as you activate it, this indicates the Herbstick is now heating to the set temperature. Once the LED appears a constant blue, green, purple, amber or red, its ready to smoke. You have about 10 minutes of standby before the device shuts down.


Setting your preferred temperature

To change the preferred temperature setting you can simply press the button twice. Red being the highest and light blue being the lowest. Depending on what you are vaping will suit the different temperatures.


Further Reading


If you have any questions, please contact us.

Happy vaping!