Hey! You're probably on this page because you made the great decision to purchase a XMax V3 Pro!
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your XMax V3 Pro.
You will have the following pieces included in the box:
- 1 x XMax V3 PRO vaporizer
- 1 x USB-C Charging Cable
- 1 x Extract cup
- 1 x Cleaning Brush
- 3 x Cleaning Cotton Buds
- 4 x Cleaning Alcohol Cotton Pads
- Instruction Manual
Charging your XMax V3 Pro
Please charge the device before use. Prior to charging, remove the plastic tab attached to the battery by giving it a firm pull.
To charge the device, insert the USB cable provided into the micro USB port on the bottom of the device. An initial charge will take approximately 1.5 hours.
It is not recommended to use the device while it is charging to avoid damage to the battery.
Perform a quick burn-off of the oven
Once the battery is fully charged, it is worth performing a 'burn-off' of the oven before packing your herbs/extracts and using the device. This will clear the oven of any leftover residue from manufacturing.
To carry this out, switch on the device by quickly pressing the Power button underneath the logo of the device three times. The LCD screen should then switch on. You can then use the 'up' button to set the device to the highest temperature.
Once the temperature has been reached, leave the device on until it switches off automatically (after 4-6 minutes).
Now the burn off is complete, the fun can start!
Packing your XMax V3 PRO
Ensure the device is switched off before loading. Remove the mouthpiece from the device. This will expose the ceramic heating chamber.
Finely grind your herbs before loosely packing into the chamber. Be careful not to over fill.
Finally, place the mouthpiece back on to the top of the device.
Place the extracts cup into the oven chamber, then use the dab/scraping tool to load your extracts/concentrates into the cup, being careful not to overfull
Finally, place the mouthpiece back on the top of the device.
Activating and setting the temperature
To switch on the device, quickly press the top Power button three times. You can switch it off by performing this same action while the device is on.
The device will automatically start to heat up under the default temperature settings, or your last used temperature setting.
To set the temperature, press or hold the 'up' and 'down' buttons to your preferred level and the device will adjust, as indicated by the number at the bottom of the LCD screen.
The device will vibrate once the set temperature has been reached, and will then be ready to use!
Vaping with your XMax V3 Pro
The XMax V3 Pro has two different modes. To switch between modes, press the 'up' and 'down' buttons simultaneously.
Session mode is the XMax V3 Pro's default setting, and the device will vibrate to indicate that it is ready to be used. Once it is ready, the session timer will begin and you'll have 4-6 minutes of constant heating to enjoy your herbs. Slowly inhale through the mouthpiece and enjoy!
There are two session timers: 4 and 6 minutes. To switch between the two timers, just hold the Power button and 'up' button at the same time for 2 seconds.
On demand mode
On demand mode gives you vapour as and when you need it, while preserving your herbs and saving battery life. This is really ideal for on-the-go vaping.
In this mode, the device will automatically suspend heating and go into 'standby' after 30 seconds, and switch off if not being used within 120 seconds.
Cleaning your XMax V3 Pro
Dismantle the device by removing all removable parts and separating the filter from the mouthpiece. Use the cleaning tool to remove residue from the chamber, and then wipe it down using the enclosed cleaning wipes.
All removable components (except for the plastic part of the mouthpiece) can be soaked in cleaning solution, or wiped down in the same fashion as above.
- Tips for getting the most out of your brand new dry herb vaporizer.
- How to best clean your vaporizer.
- Choosing the right temperature for your dry herb vaporizer.
We are sure you'll enjoy your XMax V3 Pro!
If you have any questions, please contact us.