Hey! You're probably on this page because you made the great decision to purchase a niiceone!

We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your niiceone.

 

 You will have the following pieces included in the box:

  • niiceone vaporizer
  • 2 x mouthpiece (one flat, one raised)
  • 1 x mouthpiece for concentrates
  • 1 x micro USB cable
  • 1 x cleaning knife
  • 5 x pipe cleaner
  • 1 x cleaning brush
  • User manual

 

Charging your niiceone 

To charge the battery, insert the USB cable provided into the micro USB port on the side of the device

An initial charge will take 2.5 - 3 hours. The device will automatically stop charging once full, and you will know when it's fully charged when the battery indicator on the LCD screen is at maximum capacity.

It is not recommended to use the device while it is charging to avoid damage to the battery.

 

Perform a quick burn-off of the oven

Once the battery is fully charged, it is worth performing a 'burn-off' of the oven before packing your herbs/extracts and using the device. This will clear the oven of any leftover residue from manufacturing. 

To carry this out, switch on the device by quickly tapping the LCD screen three times. Then select "dry herbs", swipe down on the screen and set the device to the highest temperature.

Once the temperature has been reached, leave the device until it switches off automatically (after 30 seconds). Repeat 3-4 times as necessary.

Now the burn off is complete, the fun can start!

  

Packing your niiceone

Dry herbs

Ensure the device is switched off before loading. Remove the mouthpiece from the device. This will expose the ceramic heating chamber.

Finely grind your herbs (preferably using an electric grinder) before loading into the chamber. Use the packing tool to pack down your herbs and be careful not to over fill.

Finally, place the mouthpiece back on to the top of the device.

Extracts/ Concentrates

Locate your extract mouthpiece (the one with the white chamber attached to the bottom), then pull the chamber from the bottom.

Next, fill the chamber with your extracts, being careful to mop up any spills from the edges or sides of the chamber.

Re-attach the chamber to the mouthpiece and firmly insert it onto the top of your device. 

 

Activating and setting the temperature

To switch on the device, quickly tap the LCD screen three times. You can switch it off by performing this same action while the device is on.

Once the device is on, touch the middle of the screen and the two different mode options "Dry herb" and "Extract" will appear. 

If you select "Extract", the device will automatically switch to a fixed temperature which cannot be adjusted.

If you select "Dry herb", you can then swipe down on the screen to bring you to "Vibrate/Temp" mode. You can adjust the vibration settings by tapping "Vibrate". 

To set the temperature, tap "Temp" and then select between Fahrenheit or Celsius. Press the middle of the screen and you can then use the arrows to set your preferred temperature. 

Now the device is ready to vape! If the device doesn't detect any activity after being in stand-by mode for 30 seconds, it will automatically switch off.

Note: the niiceone has a built-in automatic memory function that will automatically adjust to your previous settings when switched on again.

 

Cleaning your niiceone

Dismantle the device by removing all removable parts. Use the cleaning tool to remove residue from the chamber, and then wipe it down using a cotton bud soaked in cleaning solution to dislodge any tough residue.

The mouthpieces can be soaked in cleaning solution, or wiped down in the same fashion as above.

 

Further Reading

 

We are sure you'll enjoy your niiceone!

If you have any questions, please contact us.

Happy vaping!

Vape Elevate